Two-Input and Single-Output Power Multiplexer Switch
Supply Voltage Range
2.5 V to 5.5 V
RON
97 mΩ Typ. at 5.5 VIN1 or VIN2 ； 105 mΩ Typ. at 4.5 VIN1 or VIN2
2 A Continuous Output Current Capability Per Channel
Ultra-Low Supply Current at Operation
IQ : 3 μA Typ at 5.5 VIN
Ultra-Low Stand-by Current
ISD : 5 nA Typ at 5.5 VIN
Smart Control Pins
IEN and ISEL : 3 nA Typ at VEN or VSEL > VIH ； REN and RSEL : 500 kΩ Typ
No Cross Conduction Between Two Inputs
Reverse Current Blocking when Disabled
Operating Temperature Range: -40 °C to 85 °C
HBM: 6 kV, CDM: 2 kV
The GLF4028 is an integrated power multiplexer switch with dual independent power switches connected to a single output pin to enable seamless transition between two input sources.
The GLF4028 provides a manual selection mode by the combination of the logic input pins of EN and SEL. The EN input pin is used along with the select (SEL) input pin to select VIN1 only, select VIN2 only, or turn both switches off.
reduces conduction losses while low IQ and ISD solutions help designers to reduce parasitic leakage current, improve system efficiency, and increase battery lifetime.
The GLF4028 blocks any cross-conduction current between two input power sources. When the switch is disabled, the GLF4028 prevents the reverse current to the input source from the output at any higher VOUT than VIN condition.
